Documents

resolution 1 page

Also attached to this agenda item: Harmon Water Infrastructure Improvements Harmon Water Infrastructure Improvements Street Map Harmon water infra survey welsch

C:\Program Files\Neevia.Com\Document Converter\temp\PDFConvert.647.1.SurveyRequirements-CrotononHudson.docx SURVEY REQUIREME TS Village of Croton on Hudson December 8, 2011 Land and topographic survey shall be prepared by a Licensed Land Surveyor and certified in accordance with the existing Code of Practice for Land Surveys adopted by the New York State Association of Professional Land Surveyors. The limits of the survey shall be the street right of way boundary as shown on the attached map entitled Harmon Water Infrastructure Improvements. It shall be provided in digital format, both AutoCAD and PDF and four signed and sealed paper sets. The survey shall address but not be limited to the following: 1. Roads, edge of pavement, curbs, all driveway aprons 2. Site features on the homeowners side of the curb do not need to be shown with the exception of areas within 25 feet on either side of fire hydrants and ten feet on either side of water service lines 3. Show entire street right of way lines 4. Property lines (metes and bounds) tied into established reference points 5. Contours at two foot intervals 6. Scale at 1”=20’0” or as otherwise requested or noted 7. Easements (permanent or temporary access, emergency, etc.) 8. Drainage pipes, drains, invert elevations, manholes 9. Permanent Bench Mark in field 10. All utilities in the right of way including above and below ground within the right of way (i.e. gas, water, sewer, storm) including but not limited to all pipe sizes, material, inverts, rim elevations, curb boxes, hydrants, and valve boxes. Surveyor shall also call Code 753 (1-800-962-7962) 11. Maps to be done in digital form (AutoCAD 2004 or 2008 versions), AutoCAD 2000, and PDF 12. Deliverables: a. Map showing metes and bounds, structures, topographic data, and all the above as well b. Typed description of layer format (i.e. Existing curb = EC101) Surveyor will be required to submit a draft survey in paper (four sets) and digital format for review and shall be responsible to make any revisions or additions as required. NOTE: All cost proposals shall be accompanied by the detailed methodology used in defining layers formatted for AutoCAD use.