Documents

environmental 3 pages

Also attached to this agenda item: Verizon Wetlands Activity Permit FOX RD GLENGARY RD... Verizon Write-Up for Kaplans Pond FINAL

100SX VIBRATORY PLOW VIBRATORY PLOWS Versatile plow blade can bury pipe and cable with up to 12 inches (305 mm) of cover. The Ditch Witch® 100SX does more than stand its ground against the competition. Its high-flotation tires give you the traction you need without manhandling the turf, and its quiet Briggs & Stratton® engine gives you the necessary power without assaulting your ears. With the 100SX, noise and vibration stay where they belong—below the surface. 100SX VIBRATORY PLOW Compact size allows access through a standard yard gate. All controls are color-coded and accessible from the operator’s position for easy operation. Minimal maintenance requirements and easy access to service points. Self-propelled design for better maneuverability. Hydrostatic ground drive provides greater traction, maneuverability and durability. Feed and pull blades install power and communication lines up to 0.88 inches in diameter and natural gas, water service and sprinkler systems up to 0.75 inches (19 mm) in diameter. DEALER SERVICE AND SUPPORT Whether it’s new or used equipment, parts, service, financing, or all of the above, your Ditch Witch dealer is prepared to offer you the best of everything. Ditch Witch dealers are chosen for their commitment to the underground construction profession, and they are thoroughly trained to represent the highest standards in the industry. 100SX VIBRATORY PLOW SPECIFICATIONS A Charles Machine Works Company ©2015 The Charles Machine Works, Inc. U.S. METRIC DIMENSIONS Height, min/max 40 in 1.02 m Length, min 67 in 1.7 m Width Max 35 in 889 mm Min 32.5 in 825.5 mm Ground clearance, max 4.1 in 104 mm Plow cover depth, max 12 in 305 mm Basic unit weight 720 lb 326 kg OPERATION Ground drive speed, max Forward/reverse 92 fpm 28 m/min Material installation diameter, max Pull blade 0.88 in 22 mm Feed blade 0.5 in 13 mm Material bend radius, max/min Feed blade 1 in 25 mm Plow blade width Max 0.77 in 20 mm Min 0.38 in 10 mm Plow blade depth Max 12 in 305 mm Min 6 in 152 mm Dimensions are dependent on plow blade size, tire size and selection of trencher options. Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not necessarily match that shown. U.S. METRIC POWER Engine Briggs & Stratton® 2100 Series Fuel Gasoline Cooling medium Air Aspiration Natural Number of cylinders Displacement 25.6 in3 420 cc Bore 3.54 in 90 mm Stroke 2.6 in 66 mm Rated speed 3,600 rpm Manufacturer’s gross power rating (per SAE J1940) 13.5 hp 10 kW Drive type Ground Hydrostatic Plow Belt w/hand clutch Tires Max 18 x 11-8 Min 16 x 6.5-8 HYDRAULIC SYSTEM Ground drive Pressure 2,500 psi 172 bar Flow rate 2.2 gpm 8.3 l/min FLUID CAPACITIES Fuel tank 1.8 gal 6.8 L Hydraulic reservoir 3.5 gal 13.2 L VIBRATORY PLOW PARTS, ACCESSORIES AND SUPPORT: